gyta53-24b1.3光缆，gyta53型号光缆，gyta53光缆24b1
gyta53光缆结构
Product description
GYTA53光缆的结构是将250µm光纤套入高模量材料制成的松套管中，松套管内填充防水化合物。缆芯的中心是一根金属加强芯，对于某些芯数的光缆来说，金属加强芯外还需挤上一层聚乙烯(PE)。松套管(和填充绳)围绕中心加强芯绞合成紧凑和圆形的缆芯，缆芯内的缝隙充以阻水填充物。涂塑铝带(APL)纵包后挤一层聚乙烯内护套，双面涂塑钢带(PSP)纵包后挤制聚乙烯护套成缆。
The fibers, 200/250μm, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire, sometimes sheathed with polyethylene (PE) for cable with high fiber count, locates in the center of core as a metallic strength member. Tubes (and fillers) are stranded around the strength member into a compact and circular cable core. An Aluminum Polyethylene Laminate (APL) is applied around the cable core. which is filled with the filling compound to protect it from water ingress. Then the cable core is covered with a thin PE inner sheath. After the PSP is longitudinally applied over the inner sheath, the cable is completed with a PE outer sheath.
gyta53光缆型号
Product Features
具有很好的机械性能和温度特性
Good mechanical and temperature performance
松套管材料本身具有良好的耐水解性能和较高的强度
High strength loose tube that is hydrolysis resistant
管内充以特种油膏，对光纤进行了关键性保护
Special tube filling compound ensure a critical protection of fiber
良好的抗压性和柔软性
Good crush ability and soft
采用下列措施来确保光缆的防水性能
To assure the water-proof function by:
单根钢丝中心加强芯
Single steel wire as central strength member
松套管内填充特种防水化合物
Loose tube filling compound
完全缆芯填充
Fully filled in the cable
涂塑铝带(APL)防潮层
Double APL layers prevent the moisture
双面涂塑钢带(PSP)提高光缆的抗透潮能力
PSP enhancing moisture-proof
良好的阻水材料防止光缆纵向渗水
Good water-blocking tape prevent the sinking vertically
gyta53光缆结构产品标准
GYTA53光缆符合YD/T 901-2001和IEC 60794-1标准
GYTA53 cable complies with Standard YD/T 901-2009 as well as IEC 60794-1
gyta53光缆结构
Product description
GYTA53光缆的结构是将250µm光纤套入高模量材料制成的松套管中，松套管内填充防水化合物。缆芯的中心是一根金属加强芯，对于某些芯数的光缆来说，金属加强芯外还需挤上一层聚乙烯(PE)。松套管(和填充绳)围绕中心加强芯绞合成紧凑和圆形的缆芯，缆芯内的缝隙充以阻水填充物。涂塑铝带(APL)纵包后挤一层聚乙烯内护套，双面涂塑钢带(PSP)纵包后挤制聚乙烯护套成缆。
The fibers, 200/250μm, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire, sometimes sheathed with polyethylene (PE) for cable with high fiber count, locates in the center of core as a metallic strength member. Tubes (and fillers) are stranded around the strength member into a compact and circular cable core. An Aluminum Polyethylene Laminate (APL) is applied around the cable core. which is filled with the filling compound to protect it from water ingress. Then the cable core is covered with a thin PE inner sheath. After the PSP is longitudinally applied over the inner sheath, the cable is completed with a PE outer sheath.
gyta53光缆型号
Product Features
具有很好的机械性能和温度特性
Good mechanical and temperature performance
松套管材料本身具有良好的耐水解性能和较高的强度
High strength loose tube that is hydrolysis resistant
管内充以特种油膏，对光纤进行了关键性保护
Special tube filling compound ensure a critical protection of fiber
良好的抗压性和柔软性
Good crush ability and soft
采用下列措施来确保光缆的防水性能
To assure the water-proof function by:
单根钢丝中心加强芯
Single steel wire as central strength member
松套管内填充特种防水化合物
Loose tube filling compound
完全缆芯填充
Fully filled in the cable
涂塑铝带(APL)防潮层
Double APL layers prevent the moisture
双面涂塑钢带(PSP)提高光缆的抗透潮能力
PSP enhancing moisture-proof
良好的阻水材料防止光缆纵向渗水
Good water-blocking tape prevent the sinking vertically
gyta53光缆结构产品标准
GYTA53光缆符合YD/T 901-2001和IEC 60794-1标准
GYTA53 cable complies with Standard YD/T 901-2009 as well as IEC 60794-1
